|
Continuous
Rim Blades
The CSG series consistently delivers fast and clean
cutting with minimum chipping at a low cost for tile, ceramic, terrazzo,
clay roofing, porcelain, and other similar materials. Use wet or dry on
small diameters and wet on large diameters.
|
|
Turbo Rim Blades
The TSG series combines the advantage of both continuous
rim and segmented blades for cutting tile, brick, block, stone,
concrete, and other masonry materials. It is recommended for work
requiring fast, durable cutting at low cost. Use wet or dry.
|
|
Sintered Welded
Segmented Blades
The SSG series is ideal for fast cutting of masonry and
construction materials such as ceramic, brick and refractory, as well as
heavy duty cutting of concrete and stone. Use wet or dry on small
diameters and wet on large diameters.
|
|
Laser Welded
Segmented Blades - General Purpose
The SLG series is designed for general purpose cutting
of tile, brick, block, slate, stone, concrete, and concrete pipe. On a
wide range of masonry and concrete materials, the SLG series gives
superior cutting at a very competitive cost. Use wet or dry.
|
|
Laser Welded
Segmented Blades - Brick & Block
The SLB series is designed to cut a wide range of
abrasive materials such as brick, block, limestone, poroton, sandstone,
and for the early cutting of concrete before major stresses occur. On
all types of abrasive materials, from sandstone to soft abrasive block,
the SLB series provides high performance and long life at the lowest
cost. Use wet or dry.
|
|
Laser Welded
Segmented Blades - Cured Concrete
The SLC series is designed for cutting of various kind
of cured concrete such as reinforced concrete, concrete pipe, and
concrete slab. For maximum performance, outstanding cutting speed, and
long life on any kind of old concrete, the SLC series is the best choice
for the most cost-conscious users. Use wet or dry.
|
|
Laser Welded
Segmented Blades - Cured Concrete
The EPC series is designed for very heavy duty cutting
of various kind of cured concrete such as reinforced concrete, concrete
pipe, and concrete slab. Use wet only.
|
|
Laser Welded
Segmented Blades - Cured Concrete
The UPC series has the same high quality as the EPC
series with a taller segment to provide the user with a lower cutting
cost. Use wet only.
|
|
Laser Welded
Segmented - Asphalt & Green Concrete
The SLA series is designed for cutting of very abrasive
materials such as asphalt, green concrete and cinderblock. On highly
abrasive materials, the SLA series provides maximum performance and long
life with tough wear-resistant bonds and hard metal protection against
undercutting. Use wet or dry.
|
|
Laser Welded
Segmented - Asphalt & Green Concrete
The EPA series is designed for very heavy duty cutting
of very abrasive materials such as asphalt and green concrete. All
blades in this series come with hard metal protection against
undercutting. Use wet only.
|
|
Laser Welded
Segmented - Asphalt & Green Concrete
The UPA series has the same high quality as the EPA
series with a taller segment to provide the user with a lower cutting
cost. Use wet only.
|
|
Laser Welded
Segmented Blades - Marble
The SLM series is designed for cutting of different
types of marble and other hard stone materials. It delivers superior
performance and a long productive life on a wide range of stone at a
low, economical price. Use wet or dry.
|
|
Laser Welded
Segmented Blades - Marble
The UPM series is designed for cutting of different
types of marble and other hard stone materials. It delivers the same
superior performance as the SLM series, but its taller segment height
assures a longer productive life, and therefore a lower cutting cost.
Use wet or dry.
|
|
Laser Welded
Segmented Blades - Granite
The SLR series is designed for cutting of different
types of granite - the very hardest of stone materials. It delivers
superior performance and a long productive life on a wide range of stone
at a low, economical price. Use wet or dry.
|
|
Laser Welded
Segmented Blades - Granite
The UPR series is designed for cutting granite and other
very hard stone materials. It delivers the same superior performance as
the SLR series, but its taller segment height assures a longer
productive life, and therefore a lower cutting cost. Use wet or dry.
|
|
Tuck Pointing
Blades
The PSG series delivers fast, efficient removal of
mortar joints in preparation for sealing. Use wet or dry.
|
|
Crack Chasers
The CCV series delivers fast, efficient removal of
concrete in order to widen cracks in preparation for patching and
repair. Use wet or dry.
|
|
Single & Double
Grinding Cup Wheels
The WSG and WDG series are designed for fast grinding,
rough deburring and finishing of concrete, stone, and masonry surfaces.
Use wet or dry.
|
|
Turbo Grinding Cup
Wheels
The WTG series is ideal for smooth shaping and finishing
of concrete, stone, and masonry surfaces. Use wet or dry.
|
