Cooke Rentals TB135

TB 135 Mini-Excavator Available at

TB135 Features

Tilt-up operators compartment
Low and high range travel speeds
Control pattern selector valve
Emergency engine shutdown/idle system
Electronic engine monitoring system
Variable displacement axial piston hydraulic pumps
Precise response, proportional main control valves
Simultaneous operation of cab swing and two digging functions with no reduction in working speed
Straight travel with simultaneous operation of digging and swing functions
Cushioned main boom, arm and swing cylinders
Two-way auxiliary hydraulics plumbed to dipper arm
Hydraulic oil cooler
One touch engine decelerator
Tops/Fops certified 4-post canopy
Eight-way adjustable suspension seat with retractable seatbelt
Spring applied hydraulically released disc type parking brakes
Vandalism protected lockable fuel tank and engine compartment
Travel alarm
Two front mounted work lights
Electrohydraulic auxiliary hydraulic controls located in left-hand joystick
Uncluttered operators platform with hand and foot operated travel controls
Safety lockout lever for travel and operating controls
Cast iron wrap around counterweight
Heavy duty power-dig bucket
O-ring and grease seals installed on bucket pins
Double flanged track rollers
Short pitch rubber tracks
Low noise level and EPA exhaust emission compliant engine
Automatic fuel bleed system
Hydraulic and fuel sight gauges
Protective routing of bucket and arm cylinder hydraulic hoses
Main boom cylinder guard
Remote lubrication system for slew and boom swing cylinder
Lockable operators manual and tool storage compartments
Adjustable pilot operated joystick controls with armrest
Optional Isolation mounted TOPS/FOPS cab with heater/defroster, windshield wiper and washer, AM/FM cassette radio, retractable front windshield and removable lower section

TB135 Specifications:

MACHINE SPECIFICATIONS — TB135
DIMENSIONS & WEIGHT		LIFT CAPACITIES (lbs.) at 9'10" RADIUS
Operating Weight (lbs.)	7606	over front, blade down		over side
Length (transport)	16'7"	6.6 ft.	1512	1512
Width	5'4"	Ground level	2581	1505
Height	8'0"	-3.3 ft.	2603	1485
Ground Clearance	11.6"	UNDERCARRIAGE
Min. Front Swing Radius (80^o boom swing)	5'0"	Traction Motor		Axial Piston
Tail Swing Radius	4'7"	Traction Drive		Planetary
Dozer Blade (w/h)	5'4" / 16"	Traction Force (lbs.)		7798
ENGINE		Traction Brake		Disc
Make/Model	Yanmar 3TNE88TB	Track Rollers (per side)		4
Horsepower/RPM (SAE 1349 gross)	27.8/2300	Carrier Roller (per side)		1
Maximum Torque (ft.-lb./rpm)	79/1400	Track Type		Rubber
Cylinders/CID	3/100	Track Width		14"
Fuel Consumption (65% of full load) gal./hr.	1.0	Ground Contact Length		5'5"
Electrical System (volt/amp)	12/40	Ground Pressure (psi)		3.9
SWING SYSTEM		Travel Speed (mph)		1.7/3.0
Independent Boom Swing Angle (L/R)	80^o/60^o	Maximum Gradeability		30^o
Swing Speed (RPM)	9.2	HYDRAULIC SYSTEM
Swing Motor	Axial Piston	System Operating Pressure (psi)		3000
Swing Reduction	Planetary	Pump Type		2 piston/2 gear
Swing Brake	Disc	Hydraulic Flow (gpm)		9.9 x 2/5.8 x 1/2.7 x 1
OPERATING INFORMATION		Auxiliary Flow (gpm)		15.6
Max. Dig Depth	11'2"	CAPACITIES
Max. Dump Height	12'6"	Hydraulic System (gal.)		22.5
Max. Dig Height	17'1"	Fuel Tank (gal.)		13.5
Max. Reach at Ground Level	17'6"	Engine Lubrication (qt.)		5.1
Max. Vertical Dig Depth	7'8"	Cooling System (qt.)		5.7
Max. Dig. Depth w/ 2 ft. Flat Bottom	11'1"	Final Drives (qt.) each		0.6
Max. Dig. Depth w/ 8 ft. Flat Bottom	9'10"
Max. Bucket Dig Force (lbs.)	8422
Max. Arm Dig Force (lbs.)	3536

In accordance with our established policy of continued product improvement, specifications and features are subject to change without notice. Specifications are for a rubber track canopy unit with standard bucket..

Home Tools & Equipment Contact Us